Adhesives/Sealants
Aerospace room temperature adhesive
Two-component adhesive for aircraft. It is used to bond the main wing of an aircraft, etc.
| Material | Two-component and room-temperature curing adhesive.（Epoxy resin） |
|---|---|
| Capacity | 122g |
| Unit | THINKY MIXER ARE-310 / ARE-250CE |
| Operation time setting | Mixing Mode 2000rpm 45sec Defoaming Mode 2200rpm 2min |
| Compounding ratio | Main agent/Hardener 100:22(w/w) |
| Material Viscosity | Main agent :13000-6000 mPa・s Hardener :0.3-0.7 mPa・s |
| Specific gravity | Main agent：1.15 Hardener：1 |
Related data
-
Before
-
After
Supported products
THINKY MIXER （Non Vacuum） ARE-310
・Supports a wide range of materials, including high-viscosity materials and nano fillers
・The 2 modes of mixing and deaeration achieve dispersion and deaeration of high-viscosity materials in a small amount of time
・Cold-insulated, heat-resistant adapter enables support of various material characteristics
・Wide variety of adapters for using various containers
・Memory and step-operation functions for controlling and executing operating conditions
・Unique air-cooling system
